Contex HD Ultra i4290

Color Art Scanner

​

Cleaning the scan area

Follow the steps below for thoroughly cleaning the scanner and scan area. Be sure to clean the scan area when results are not optimal. Even small dust particles in the scan area can cause streaks in your scanned image.

You must clean the following scanner parts/areas:

1. The scanner bed
2. Glass plate
3. White background
4. Upper and lower rollers

 Caution: do not use abrasives, acetone, benzene, or fluids that contain these chemicals. Do not spray liquids directly onto the scanner glass plate or anywhere else in the scanner.

 Caution: Before cleaning the scan area, be sure to turn the scanner power off and disconnect the power plug.

To Clean the scan area

You need to open the lid to access and clean the scan area. Follow the instructions below.

Step 9. Plug the scanner back in and verify it is powered on.