Load the Ink Tank (700 ml)

1.Before opening the pouch, hold the new Ink Tank with both hands and tilt it to the left and right as shown, shaking gently it seven or eight times.

Caution: 700 ml ink tanks are heavy, so use your whole arm to agitate it instead of just your wrist. If you agitate it using just your wrist, you may injure your wrist.

Important: Do not remove and agitate ink tanks that have already been installed in the printer. Ink may leak out. Important • If you do not agitate the Ink Tank, the ink may settle, which may affect printing quality.

2. Open the pouch and remove the Ink Tank.

Important: Never touch the ink holes or electrical contacts. This may cause stains, damage the Ink Tank, and affect printing quality.

3.Press the OK button and insert the Ink Tank into the holder facing as shown, with the ink holes down.

Important: Ink tanks cannot be loaded in the holder if the color or orientation is incorrect. If the Ink Tank does not fit in the holder, do not force it into the holder. Please make sure the Ink Tank, Lock Lever color matches the color of the Ink Tank, and check the orientation of the Ink Tank before reloading it.

4. Lift the Ink Tank Lock Lever until it stops, and then push it down until it clicks into place.

5. Make sure the Ink Lamp is lit in red.

Note: If the Ink Lamp is not lit in red, reload the tank.

6. Close the Ink Tank Cover.

Important: After Ink Tank replacement, always close the Ink Tank Cover. If the Ink Tank Cover cannot close, some Ink Tank Lock Lever may not be closed completely. Make sure all ink tank lock levers are fully closed. To close the Ink Tank Cover when no Ink Tank is installed (as when moving the printer), push the release lever (a) as shown while returning the Ink Tank Lock Lever to the original position.