2. Press ▲ or ▼ to select "Load Roll Paper", and then press the OK button.
Note: If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press ▲ or ▼ to select " Yes ", and then press the OK button. Remove the paper and go to the next step.
3. Open the Top Cover and lift the Ejection Guide.
4. Holding the Roll Holder so that the side with the white gear faces the side of the Roll Holder Slot with a white gear, load the Roll Holder shaft (a) into the grooves (b) on both ends of the Roll Holder Slot, fully into the slot.
- Be careful not to drop the roll and hurt yourself when loading it. Caution
- Be careful not to pinch your fingers between the Roll Holder shaft (a) and the guide grooves (b) when loading rolls.
5.Pull out the roll evenly on both ends and insert it in the Paper Feed Slot (a). Advance the roll until it touches the PaperRetainer (b).
Once the roll reaches the Paper Retainer, it is automatically advanced over the Plate
Important:
- When handling the roll, be careful not to soil the printing surface. Otherwise, it may affect printing quality. We recommend wearing clean cloth gloves when handling rolls to protect the printing surface.
- If the paper is wrinkled or warped, straighten it out before loading it.
- For paper that tends to curl, lift the Release Lever and manually pull the roll paper over the Platen.
- Load paper straight so it is not fed askew.
6. Lower the Ejection Guide.
7. Holding the edge of the roll paper, lift the Release Lever.
8.Hold the edge of the roll paper as you gently pull it evenly with both hands to the position of the Ejection Guide (a). Align the right side of the roll paper with the Paper Alignment Line (b), keeping this side parallel to the line, and then lower the Release Lever.
Important:
- Do not omit steps 7 and 8. If paper cannot be advanced straight or if it wrinkles, it may jam or rub against the Printhead.
- Do not force the roll paper into alignment with the paper alignment line (b). This may prevent the paper from being advanced straight.
9. Close the Top Cover.